ADA Washroom Checklist

Don't forget ANY of these!

{ checklist }

• Divide Stalls/Urinals (60" x 60" min for ADA, door swing out; 60" x length of wall, door swing in; 36" x 48" standard, door swing out)
• Doors are 30-32" in standard, 36" in ADA stalls
• Draw in wall-hung toilets & Urinals
• Draw in grab bars to scale and dimension length from wall and length of bar (36" behind toilet mounted 6" from nearest wall, 42-48" beside mounted 12" from nearest wall)
• Dimension stalls (width and depth!!) 
• Dimension center lines of toilets to stalls/walls; 18" from each side
• Dimension center lines of urinals to privacy screen/walls; 18" from each side
• Draw in Lavatory(ies)
• Indicate which one has ADA open space below; the width of open space
• Draw in mirrors, soap dispensers (1) per sink, hand dryer, trash receptacle 
• Draw turning circles 60" in common area, at door, and in ADA stall (not overlapping door swing!)
• Draw 30 X 48 clear floor space to scale (dotted rectangle) at sink and ADA urinal (NOT at toilet) and LABEL it as such.
• Tag all fixtures (!!!)

If you practice this (perfectly) often, you'll be able to do it in 10 minutes! I am not kidding! 

And that means... more time to spend on the less-predictable Millwork exercise!

Almost there,
Carlyn

Sim Day Results: ADA Washroom

ADA Washroom is another easy-breezy section for me. Along with Systems Integration, I find it's less intense than Space Planning, Egress, and Life Safety. It's 30 minutes and it's pretty straightforward. It's always a men's restroom (as we must know urinal clearances) and it almost always has the exact same requirements. Below is a breakdown, not my actual results. Results follow and they're boring because I only missed one dimension.

{ The Deets }

• (1) Accessible min 60 x 60 toilet stall with 36W grab bar behind the toilet, a 42W grab bar beside the toilet, a 60" turning radius, side access, a 36W door, and dimensions/tags of all; door swings out.
• (1-2) Standard toilet stalls 36W by 48D with a 30W min door or a 32W door, dims to center-line of toilet and indication of the width and depth; door swings out.
• (1-2) Standard urinals tagged and dimensioned; TIP: min space between two urinals center-line to center-line is 32".
• (1) Accessible urinal tagged/dimensioned and a 30 x 48 clear wheelchair space.
• A degree of privacy from door sight line, screens between each urinal
• Tag all fixtures
• Fill in fixture schedule provided like this one
• Fill in finish schedule for substrate and finish:
• Cement backer board
• Ceramic tile (if you want to get fancy, glazed ceramic tile or glazed ceramic subway tile are also acceptable)

TIP: My dad's an architect - so I'm often calling him with questions. I was chatting with him about the ADA Washroom exercise and he said (which may be obvious to others and it's how I've been doing it, but still a good reminder!) to start with the ADA toilet stall in the corner and work your way over with the remaining space. 

[ start at wall furthest from door -> 60 x 60 -> 1.5 panel -> 36 x 48 -> 1.5 panel -> 36 x 48 -> 1.5 panel -> 16-18" to cL of urinal -> 1.5 privacy screen -> 16-18" to cL of next urinal -> 1.5 privacy screen -> 16-18" to cL of ADA urinal -> 1.5 privacy screen ]*

*this is just an example. Your actual test requirements for quantities of stalls/urinals may vary. 

I did very well on the 2010 PDP which I used for my Sim Day. However, the test is formatted differently now. All clearances were shown, tags added, and dimensions to fixtures. I saw one example where a candidate didn't tag any of her fixtures, but labeled a few. It was still a passing solution.

Good luck,

Carolyn

Dimlabelgram!!

It's not a spelling error, friends. It's a word I invented that makes both me and my husband laugh. And sticks in my brain. And it holds a strategy which I think will help anyone avoid mark-downs for "small" errors. Let's say it together now: Dimlabelgram.

... { Meaning }...

Dimlabelgram: (v) [dim-LAY-bull-gram] the act of checking one's Practicum exercises for proper dimensions & clearances, labeled  FFE & mounting heights, and compliance with the provided program.

Example:
Halt! 10 minutes to go! Time to dimlabelgram my solution! Oops... didn't label my mirror. Oops again, forgot a 5'-0" turning circle. 

I found that pretending I'm a grader for the last 10-15 minutes of each exercise forces me to scrutinize the details. This isn't a good time to catch something big and irreversible. This is why it's important to evaluate your plan of attack early on - see one of my strategies "The Three Phases" of Space Planning in this post. To avoid 3 to 4 little mistakes is valuable to me. I have even considered writing it on my test booklet in big red letters. But then again, you hand those booklets back in. And I wouldn't want the graders thinking I've got a few screws loose. Which I suppose is true. Per this post. But whatever it takes to pass... have some fun along the way. 

Should I "Add this to dictionary" per Spellcheck?

Happy DLG-ing,
Carolyn